Tips on how to make a customizable pet meals tray that can maintain as much as water and messes!
I made an lovable, washable feeding station utilizing scrap wooden and paint we had readily available and we LOVE it! It turned out so cute.
That is the second time I’ve made a customized DIY pet meals tray. I am going to present you my first model on the finish of this publish!
So we determined to maneuver them again into the pantry on the finish of the room, however I needed to construct a brand new pet meals tray to coral their messes a bit.
Our canine appears to drip extra out of their water bowl than truly drink it, and our cats drop their meals throughout their bowls. We wanted one thing that might be washed and maintain as much as standing water over time.
Fortunately I had a lot of the supplies wanted for this cute tray already, so this was an excellent cheap undertaking!
I began with a chunk of scrap wooden for the underside of the tray, after which mitered the ends of a 1×2 to make a “body” across the backside:
This publish could comprise affiliate hyperlinks in your comfort.
I’ll earn a small fee when you make a purchase order via hyperlinks.
This tray is a superb newbie undertaking should you’re simply beginning out with instruments and DIYing!
I measured the pet bowls to see what dimension I wanted and I ended up with 30 inches for the bottom of the tray. I minimize down my 1x2s for the lip on my miter noticed.
To connect the trim, I added a bead of wooden glue earlier than nailing them into the perimeters of the bottom with my nail gun:
If you do not have a nail gun, wooden glue can be adequate — you will simply must let it dry earlier than transferring on.
After which as a result of I needed this to be water tight I caulked the gaps between the bottom and the trim. That is tremendous vital to maintain any water from moving into the crevices!
I had this wooden primer from Sherwin-Williams readily available and it was excellent for this undertaking because it’s made to guard exterior surfaces that get rain:
Any primer will work, however this model simply offers a bit extra safety.
Wooden surfaces can maintain as much as loads of moisture with caulk and paint!
A couple of coats of excellent paint will forestall even MDF from absorbing water.
After two coats of primer, I put a fast coat of white paint on simply the bottom of the tray after which let that dry for day earlier than transferring on to the lovable a part of this DIY. 🙂
I obtained some pet wall vinyls final yr for an additional undertaking, and thought this tray can be one other cute manner to make use of them! I put a couple of on the underside over the white paint:
Retaining the vinyls on, I painted a pair coats a light-weight grey over all the factor:
I colour matched our pantry cupboards to get this colour, here is the formulation you may take to the paint retailer:
It is such a beautiful grey colour — no bizarre undertones in any respect!
Subsequent, I needed so as to add some ft to get the tray up off the ground. I needed it to be open a bit beneath in case water spilled out.
I discovered these cute little wooden toy wheels on the craft retailer and painted 4 in that very same grey paint:
I hooked up these into every nook beneath the tray with screws.
After the paint was absolutely dry, I used some tweezers to tug up the canine and cat vinyl designs:
I let the whole lot dry for a full day earlier than placing the meals bowls on the tray. It turned out SO cute!!:
Adoyable as my neice would say! 🙂
I stored strolling round with it, exhibiting my household how stinking cute it was. 😂
I made it to suit on the finish of our pantry:
We do not stroll down that far since that finish cupboard opens out in direction of us, so it is loads out of the best way.
I like having their meals again in right here so that they have extra of a relaxed house to eat. It is also nice as a result of we hold the cat and pet food in that cupboard and it is simply accessible.
The animals appear to love it. Ha! SO cute:
It is out of the best way and offers them loads of room. This tray additionally elevates their meals bowls, which is best for meals digestion.
I put this easy undertaking off endlessly, and eventually obtained it accomplished for round $10 in supplies!:
Years in the past I made a really comparable tray at our previous home. I used some painter’s tape to create a easy striped design on that one:
I believe the dimensions was the very same! I do not know what occurred to this one — I am unable to bear in mind what we did with it. We had SO many issues go lacking in our transfer, perhaps it was a kind of.
It turned out actually cute as properly — you may customise these so some ways whenever you make your personal pet meals tray:
I’ve made fairly a couple of ornamental trays in my day, together with this tray with leather-based handles, and this Lego hideaway tray.
I can by no means discover the right sized tray at pet shops, so it is a You may change these up so some ways — add some handles, use a stencil on the bottom, no matter you need – the chances are limitless! 🙂