Simple DIY Wall Mounted Folding Desk Workbench from a Door

Construct your personal DIY folding workbench on your storage in simply in the future! This newbie tutorial and woodworking plan makes use of a stable core door and cheap lumber to make a wall mounted folding desk for below $100, excellent for woodworking and different DIY initiatives.

You may as well construct a big folding transportable work desk or improve your storage workshop with a DIY desk noticed workbench with storage.

DIY Folding Workbench for the Storage

I’ve a love hate relationship with my storage.

I find it irresistible when it’s clear, and I can truly park in it.

I hate it (90% of the 12 months) when it isn’t!

I had this nice thought to make use of a paint coated folding desk as my work desk within the storage. In actuality, the desk changed into a dumping floor. After nearly each venture we work on round the home the instruments, and remaining components find yourself on that desk. I’d share an image, however it’s too embarrassing!

I lastly had it final week, and cleaned every little thing off and took the desk out of the storage. Now I would like a desk. So why not construct one?

Listed here are my “work desk” prerequisites:

1. Capable of be simply put away so messes can’t accumulate
2. Sturdy and robust sufficient for constructing furnishings
3. Massive working space

Looks like a fairly brief listing, however it’s what I would like! So after a fast flip world wide huge net for inspiration I provide you with The Wall Mounted Folding Desk Workbench.

I’m sharing all the information about how you can construct your personal (plus a fast DIY hack for an excellent sooner wall mounted folding desk!) so maintain studying for the detailed meeting directions.

This submit incorporates affiliate hyperlinks. Study extra and skim our full disclosure coverage right here.

What makes this DIY wall mounted folding desk inexpensive and simple

This minimalist DIY folding workbench or desk has a couple of key options:

• simple to construct (no over-engineering wanted right here!)
• simple to fold as much as clear up storage area
• provides you a big stable wooden work desk floor
• all for below $100 in supplies!

The key to this quick and simple wall mounted folding desk is that I used a solid core wood door as a substitute of plywood for the tabletop.

A solid wood door (unbored) is a perfect answer for a workbench floor in a storage or shed (or for a wall mounted folding desk desk) as a result of it’s very clean, very sturdy, no cuts required. And it’s a fairly inexpensive different to a sheet of plywood or two, with added sturdiness. 

It simply takes a couple of dollars in different lumber and a few hinges to show a door into a big fold-up workbench on your storage or numerous websites the place you want a drop-leaf desk.  

You possibly can modify the dimensions to make a standing desk or a laptop computer laptop desk for extra lecture room, or perhaps a space-saving eating desk for a small condominium or slim room. This drop-down folding desk would make an amazing laundry room desk for folding garments, too! 

No casters, no cabinets — only a sturdy and easy wall-mounted folding desk that takes up no flooring area.

You’ll want a pocket hole jig to connect the entrance desk skirt. Aside from that, a miter noticed and nail gun make the construct go sooner, however you if you’re simply beginning out and don’t have the instruments, you’ll be able to simply use a hammer and a hand saw with a miter box. Or perhaps it’s time to spend money on a round noticed or a miter noticed!

Workbench Dimensions and Changes

The completed DIY folding workbench measures 36 inches (D) x 80 inches (W) x 41.25 inches (H) when constructed as proven. You possibly can modify the peak to your perfect standing desk peak, in addition to adjusting the bench high width and depth by utilizing a 78″ or 84″ solid core door.

• I used a 36×80 non-bored solid core hardwood slab door to make this massive wall-mounted work desk. Regulate the lengths of the 80″ lumber cuts if you’re utilizing a 78″ or 84″ door as a substitute to suit your accessible wall area.
• The peak of the folding workbench floor as listed is 41-1/4″. For a taller or shorter workbench, modify the size of the legs (and the peak that the ledger board is mounted).
  • Commonplace bar peak is 42″ however for my (common) peak the very best standing desk peak is just a bit shorter than that, so I put the work bench peak barely decrease however nonetheless tall sufficient to make use of a typical barstool.
  • Make sure that you’ll be able to attain the highest of the desk when folded to safe the latch.

DIY Folding Workbench Materials Record

Right here’s what you might want to construct your personal fold-up storage work desk — only a stable core door, 4 boards, and a few hinges and {hardware}. You would possibly have already got a few of these supplies in your scrap pile.

Searching for a discount? You’ll want to verify your native Habitat For Humanity ReStore for constructing supplies and {hardware}!

Lumber

When selecting lumber, you’ll want to comply with the following pointers and methods to decide on the very best and straightest boards. That is particularly necessary if you end up utilizing inexpensive cuts like furring strips.

Different supplies and {hardware}

Notice: There are a number of methods you’ll be able to safe the fold-up workshop desk to the wall. You may use hook and eye latches, a pair items of scrap wooden, a barrel bolt lock, and many others. I selected the heavy-duty hasp as a result of it’s sturdy, simple to put in, and locks simply.

Really useful instruments

Reduce Record

• Ledger: minimize 1 – 2×6 @ 80″
• Workbench Help: minimize 1 – 2×4 @ 80″
• Leg Help: minimize 1 – 2×4 @ 6″
• Hinge Helps: minimize 2 – 2×4 @ 2″
• Legs: minimize 2 – 2×2 @ 38″
• Desk Skirt: minimize 1 – 1×4 @ 80″

Components Preparation

Within the leg help (2×4 @ 6″), drill 3 pocket holes alongside one lengthy edge.

Pre-drill 3 holes by means of every hinge help piece (2×4 @ 2″) for attaching later.

Within the desk skirt piece (1×4 @ 80″), drill pocket holes 2″ from the ends, and about each 8-10″ alongside the size of the board.

Frivolously sand all items. You possibly can seal with an non-obligatory coat of poly now or after constructing.

Tips on how to Construct a DIY Folding Workbench

Step 1: Mark The Wall, Ledger, and Wall Studs

First, discover the middle of the wall area the place your desk will go — make certain your 80″ desk will match! Mark the 40″ heart on the wall.

Subsequent, mark the peak of the 2×6 ledger, which will likely be 41-1/4″ from the ground. In case you are taller or shorter, you’ll be able to modify this peak to your choice. You’ll additionally want to regulate the size of your 2×2 folding workbench legs.

Mark the middle (40″) of your 2×6 that you just minimize @ 80″.

Discover and mark the stud places. In my storage the partitions weren’t painted so I might simply see the place my wall studs had been. It would be best to discover and mark the place your entire studs are earlier than you hold your 2×6 ledger board.

Step 2: Dangle the Ledger

The ledger will maintain the complete DIY folding workbench to the wall, so be certain it’s stage and well-secured to the wall studs with heavy responsibility fasteners. Chances are you’ll want an additional set of fingers for this step. 

Match the 2 heart marks from the wall and the two×6 ledger. Place the extent on the board and make certain it’s stage at 41″.

Utilizing the end nail gun, place 3 or 4 nails in studs to carry the 2×6 in place.

End up by drilling 2 – 3″ screws by means of the 2×6 at every wall stud location.

Step 3: Dangle the two×4 Workbench Help

Measure down from the highest of the ledger board 1-3/4″. This would be the mounting peak on your 80″ 2×4 workbench help, and can permit the folding desk to take a seat on the two×4 whereas in use, including stability to your desk.

This subsequent step is rather like hanging the two×6. The highest of your 2×4 must be in your 1-3/4″ mark. Make sure that the ends are flush with the two×6, stage the two×4, and connect with 3-4 nails as earlier than.

Then, drill 2 – 3″ screws by means of the two×4 into the two×6 at every stud location.

Step 4: Connect Hinge Helps to Desk Prime

Now it’s time to work on the precise desk!

Until you may have tremendous human energy you will have somebody that can assist you transfer your stable core door to an appropriate work location. In my case it was on the driveway as a result of I didn’t have a piece desk! Sawhorses are an amazing addition to your workshop to raise your work on a venture like this.

Measure on the underside of your door 3-1/2″ from the entrance nook on each side. Place the 2x4x2″ hinge help items behind the mark. You need to use clamps to carry in place as properly.

Screw 2×4 items into place utilizing 2-1/2″ or 3″ screws. (I pre-drilled 3 holes in these items in order that they didn’t break up once I drilled screws into them.)

For added safety, you may also use wooden glue with the screws.

Step 5: Connect the Desk Skirt

Connect the desk skirt to the underside of the workbench high at 1-1/2″ from the entrance edge, utilizing pocket gap screws.

To put in the entrance skirt piece I made a jig to hurry up the method.

I used a leftover piece of the two×2 and nailed it to a chunk of 1×4. Then I positioned the two×2 aspect on high of the door, and pressed the skirt in opposition to it as I screwed the skirt to the underside of the desk utilizing the pocket holes. Make sure that your ends are flush earlier than you begin attaching with pocket gap screws!

Step 6: Connect the Workbench Legs and Hinges

Connect the small hinges to the 2x2x38 legs. Mark heart on the alternative aspect of the leg from the hinge on every leg, and mark heart on the skin of the 2x4x2 items mounted to the desk.

Line up the middle marks, and connect the opposite aspect of the hinge to the within of the 2x4x2 block.

I initially used the screws offered for this step, however discovered they allowed an excessive amount of motion when decreasing the door. So I changed them with 2″ screws as a substitute.

Step 7: Connect the Leg Help

Fold your legs in order that they sit in opposition to the underside of the desk, and connect the 2x4x6 items utilizing pocket holes  and a couple of″ screws so the board sits in opposition to the desk legs. That is the place the legs will relaxation when the desk is folded up.

Step 8: Connect the Desk to the Ledger with Hinges

Time to name in your heavy lifting helper once more! Whereas holding the legs in place, carry the work desk to the ledger board you may have already connected to the wall.

That is the second of fact. Enable the legs to fold down, and place the again of the desk on the two×4. Your desk ought to sit firmly on the bottom. Chances are you’ll have to straighten the legs in order that they sit flush on the bottom and on the two×4 blocks on the underside of the desk.

Tip: If the ground isn’t precisely stage and also you desire a safer leg contact with the bottom, use a big washer below the leg.

Now measure a 1/2″ hole between the two×6 and the again of the desk. This may permit the hinge to maneuver freely.

Connect the hinges to the desk and the two×6. I put in 2 hinges 4″ from the sting, and one within the heart.

Take a look at out these hinges with a helper! Fold your door up, and mark the place the highest edge meets the wall on a wall stud as near the heart of the desk as potential. Decrease your desk down once more. It’s enjoyable isn’t it!

Two extra closing touches and you’re completed!

Step 9: Set up the Hasp

This hasp and latch are the important thing to the “fold-up” a part of the folding workbench. The twisting a part of the hasp goes on the aspect of the work desk, and the hinged a part of the hasp goes on the wall (within the wall stud for safe attachment).

Measure the place that stud is in relation to the top of your desk. Switch that measurement to the entrance of your desk, and connect the twisting piece of the hasp to your desk.

Set up the hinged a part of your hasp 1/2″ above the road you marked and the identical distance from the top of the desk.

Now you need to be capable of fold your desk up and lock it in place! Attempt it out!

Step 10: Apply End Coat (Optionally available)

The ultimate step is non-obligatory. I brushed on a coat of polyurethane to guard my desk high. This one is completely as much as you!

I hope you get pleasure from your new CLEAN workspace!

Subsequent up for me is cleansing up the storage area, and I’m contemplating including pegboard under the bench to retailer extension cords and different low-profile instruments and supplies.

Extra Area Saving Options for Your Storage